Electro-Glo Logo Electropolishing

Hardness Test Standard Solution Total

Home » Products » Hardness Test Standard Solution Total

Choose factor; 10, 50, 100,

1,000 ppm as CaCO3.
Hardness testing should be carried out at a pH of 10.5 or greater. If Iron is present in any great amount, it may become an interference agent to suppress the total hardness found. Most, if not all, Hardness reagent systems have some limited Iron suppression agents contained in their formulations. Remove gross amounts of Iron as an interfering agent by filtration or by precipitation. Metallic ions such as Aluminum, Copper or Zinc can be interfering agents if present in sufficient quantity.

$14.30

SKU: MCI # 006/-E
Supplied by: Masters Company Inc.

Choose factor; 10, 50, 100,

1,000 ppm as CaCO3.
Hardness testing should be carried out at a pH of 10.5 or greater. If Iron is present in any great amount, it may become an interference agent to suppress the total hardness found. Most, if not all, Hardness reagent systems have some limited Iron suppression agents contained in their formulations. Remove gross amounts of Iron as an interfering agent by filtration or by precipitation. Metallic ions such as Aluminum, Copper or Zinc can be interfering agents if present in sufficient quantity.

Additional information

Size

10 ppm, 100 ppm, 1000 ppm, 50 ppm

Request A Callback

Whether you are looking for a quote or have questions about our products, we're here for you, fill in the form below and a member of our team will call you back as soon as possible.